? semiconductor components industries, llc, 2012 january, 2012 ? rev. 7 1 publication order number: mbrb4030/d mbrb4030g, NRVBB4030T4G preferred device switchmode power rectifier these state ? of ? the ? art devices use the schottky barrier principle with a proprietary barrier metal. features ? guardring for stress protection ? maximum die size ? 175 ? c operating junction temperature ? short heat sink tab manufactured ? not sheared ? aec ? q101 qualified and ppap capable ? nrvbb prefix for automotive and other applications requiring unique site and control change requirements ? all packages are pb ? free* mechanical characteristics: ? case: epoxy, molded, epoxy meets ul 94 v ? 0 ? weight: 1.7 grams (approximately) ? finish: all external surfaces corrosion resistant and terminal leads readily solderable ? device meets msl1 requirements ? esd ratings: ? machine model = c (> 400 v) ? human body model = 3b (> 8000 v) *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. schottky barrier rectifier 40 amperes, 30 volts preferred devices are recommended choices for future use and best overall value. 3 1 4 http://onsemi.com d 2 pak case 418b style 3 marking diagram b4030g aka a = assembly location y = year ww = work week b4030 = device code g = pb ? free package aka = diode polarity see detailed ordering and shipping information in the package dimensions section on p age 2 of this data sheet. ordering information ay ww
mbrb4030g, NRVBB4030T4G http://onsemi.com 2 maximum ratings rating symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 30 v average rectified forward current (at rated v r ) t c = +115 ? c (note 1) i f(av) 40 a peak repetitive forward current (at rated v r , square wave, 20 khz), t c = +112 ? c i frm 80 a non ? repetitive peak surge current (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 300 a peak repetitive reverse surge current (2.0 s, 1.0 khz) i rrm 2.0 a storage temperature range t stg ? 65 to +175 ? c operating junction temperature range (note 2) t j ? 65 to +175 ? c voltage rate of change (rated v r ) dv/dt 10,000 v/ s reverse energy (unclamped inductive surge), (t c = 25 ? c, l = 3.0 mh) w 600 mj stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. 1. rating applies when pins 1 and 3 are connected. 2. the heat generated must be less than the thermal conductivity from junction ? to ? ambient: dp d /dt j < 1/r ja . thermal characteristics characteristic symbol value unit thermal resistance, junction ? to ? case r jc 1.0 ? c/w thermal resistance, junction ? to ? ambient (note 3) r ja 50 ? c/w 3. rating applies when surface mounted on the miniumum pad size recommended. electrical characteristics characteristic symbol value unit maximum instantaneous forward voltage (notes 4 and 5), per device (i f = 20 a, t c = + 25 ? c) (i f = 20 a, t c = +150 ? c) (i f = 40 a, t c = + 25 ? c) (i f = 40 a, t c = +150 ? c) v f 0.46 0.34 0.55 0.45 v maximum instantaneous reverse current (note 5), per device (rated dc voltage, t c = + 25 ? c) (rated dc voltage, t c = +125 ? c) i r 0.35 150 ma 4. rating applies when pins 1 and 3 are connected. 5. pulse test: pulse width = 300 s, duty cycle ? 2.0% ordering information device package shipping ? mbrb4030g d 2 pak (pb ? free) 50 units / rail mbrb4030t4g d 2 pak (pb ? free) 800 units / tape & reel NRVBB4030T4G d 2 pak (pb ? free) 800 units / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
mbrb4030g, NRVBB4030T4G http://onsemi.com 3 electrical characteristics v r , reverse voltage (v) v r , reverse voltage (v) i r , reverse current (a) i f , instantaneous forward current (a) (pin 1 shorted to pin 3) figure 1. maximum forward voltage v f , instantaneous voltage (v) 100 10 1.0 0.1 0.8 0.6 0.4 0.2 0 figure 2. typical forward voltage v f , instantaneous voltage (v) 100 10 1.0 0.1 0.7 0.6 0.4 0.1 0 figure 3. maximum reverse current v r , reverse voltage (v) 1.0 0.1 0.01 10 -3 10 -4 10 -5 30 25 15 10 0 figure 4. typical reverse current 1.0 0.1 0.01 10 -3 10 -4 10 -5 30 25 10 0 i r , reverse current (a) 0.7 0.5 0.3 0.1 0.5 0.3 0.2 20 5 20 15 5 figure 5. maximum and typical capacitance 10 4 1000 10 c, capacitance (pf) 1 typical 25 ? c t j = 150 ? c 100 ? c t j = 25 ? c 25 ? c t j = 150 ? c 100 ? c 25 ? c t j = 150 ? c 100 ? c 25 ? c t j = 150 ? c 100 ? c i f , instantaneous forward current (a) (pin 1 shorted to pin 3) maximum
mbrb4030g, NRVBB4030T4G http://onsemi.com 4 electrical characteristics i f(av) , average forward current (a) 50 40 30 20 10 0 70 50 30 p f(av) , average forward power dissipation (watts) 60 40 80 dc 10 (pin 1 shorted to pin 3) t a , ambient temperature ( ? c) i f(av) , average forward current (a) (pin 1 shorted to pin 3) t a , ambient temperature ( ? c) 20 15 10 5 0 50 i f(av) , average forward current (a) 100 dc 10 20 square wave (pin 1 shorted to pin 3) 150 12 10 8 6 2 0 150 100 050 t, time (ms) 1.0 0.1 0.01 100 0.1 r(t), effective transient thermal 10 1.0 1000 single pulse resistance (normalized) surface mounted on minimum recommended pad size r ja = 25 ? c/w 4 square wave 20 010 i pk i av = 5.0 (capacitive load) i pk i av = 5.0 (capacitive load) ? (resistive load) i pk i av = 5.0 (capacitive load) 20 t j = 150 ? c 10 20 dc ? (resistive load) r ja = 50 ? c/w ? (resistive load) square wave t c , case temperature ( ? c) 70 50 40 30 20 10 0 140 120 100 i f(av) , average forward current (a) 130 110 150 10 20 square wave (pin 1 shorted to pin 3) 60 dc i pk i av = 5.0 ? (resistive load) (capacitive load) p pk p pk t p t 1 time duty cycle, d = t p /t 1 peak power, p pk , is peak of an equivalent square power pulse. t jl = p pk ? r jl [d + (1 - d) ? r(t 1 + t p ) + r(t p ) - r(t 1 )] where t jl = the increase in junction temperature above the lead temperature r(t) = normalized value of transient thermal resistance at time, t, for example, r(t) = r(t 1 + t p ) = normalized value of transient thermal resistance at time, t 1 + t p . figure 6. current derating, infinite heatsink figure 7. current derating figure 8. current derating, free air figure 9. forward power dissipation figure 10. thermal response
mbrb4030g, NRVBB4030T4G http://onsemi.com 5 package dimensions seating plane s g d ? t ? m 0.13 (0.005) t 23 1 4 3 pl k j h v e c a dim min max min max millimeters inches a 0.340 0.380 8.64 9.65 b 0.380 0.405 9.65 10.29 c 0.160 0.190 4.06 4.83 d 0.020 0.035 0.51 0.89 e 0.045 0.055 1.14 1.40 g 0.100 bsc 2.54 bsc h 0.080 0.110 2.03 2.79 j 0.018 0.025 0.46 0.64 k 0.090 0.110 2.29 2.79 s 0.575 0.625 14.60 15.88 v 0.045 0.055 1.14 1.40 ? b ? m b w w notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. 418b ? 01 thru 418b ? 03 obsolete, new standard 418b ? 04. f 0.310 0.350 7.87 8.89 l 0.052 0.072 1.32 1.83 m 0.280 0.320 7.11 8.13 n 0.197 ref 5.00 ref p 0.079 ref 2.00 ref r 0.039 ref 0.99 ref m l f m l f m l f variable configuration zone r n p u view w ? w view w ? w view w ? w 123 d 2 pak 3 case 418b ? 04 issue k style 3: pin 1. anode 2. cathode 3. anode 4. cathode *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 8.38 5.080 dimensions: millimeters pitch 2x 16.155 1.016 2x 10.49 3.504
mbrb4030g, NRVBB4030T4G http://onsemi.com 6 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 mbrb4030/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
